07-10-2015, 06:54 PM
(07-10-2015, 09:12 AM)hariram Wrote:(07-10-2015, 06:39 AM)Hi Peter,I am sharing few more information to resolve the confusion between TTU/ETU/TC or TU/ETU/TCU. Wrote: I too have little knowledge of AFTC working. Here i am stuck up with TCU i.e Track Coupling Unit testing.
Attaching file for better understanding.
(07-10-2015, 04:51 AM)hariram Wrote: Hi Peter
Thank you for all information !!!
..........................................................................
Now with the above information I am testing TCU but ideally i have no idea what should be the load,as it is directly connected to Track. Secondly as TCU has single side track its load should be half of TU.
I need more information regarding TCU testing in ideal condition.
Thanks
Hari.
From the picture you helpfully attached, I am a little bit confused and will need to check the literature.....
It does sound as if you are using the equipment in a configuration with which I am not familiar.
You are probably right; in my days the TI21 could only be used as a double rail track circuit.
However I do know that it can now be used through pointwork as a single rail track circuit but do not know what components are required for this; I shall have to bring my knowledge up to date and respond to you later.
But in the meantime, I still don't actually understand precisely your use of the word "load".
I agree that the track circuit would form the electrical load for the transmitter as seen via the various transformers etc. so I have no problem with the term in that context; however I do not comprehend why you would need to know its value when testing the track circuit set up. Please explain further.
PJW